ファイル定義書 VC2010

igb_82575.c

ファイル名ファイル名

igb_82575.c

ソースファイル情報ソースファイル情報

内容 行数 比率
コメント行数 423 26%
空行行数 311 19%
実行行数 883 55%
合計行数 1617 100%

関数定義数関数定義数

内容 定義数
関数数 34

定義関数定義関数

No. 名称 属性 説明
1
StaticStatic igb_init_phy_params_82575 static s32 igb_init_phy_params_82575 - Init PHY func ptrs.
2
StaticStatic igb_init_nvm_params_82575 static s32 igb_init_nvm_params_82575 - Init NVM func ptrs.
3
StaticStatic igb_init_mac_params_82575 static s32 igb_init_mac_params_82575 - Init MAC func ptrs.
4
FunctionFunction igb_init_function_pointers_82575 void igb_init_function_pointers_82575 - Init func ptrs.
5
StaticStatic igb_acquire_phy_82575 static s32 igb_acquire_phy_82575 - Acquire rights to access PHY
6
StaticStatic igb_release_phy_82575 static void igb_release_phy_82575 - Release rights to access PHY
7
StaticStatic igb_read_phy_reg_sgmii_82575 static s32 igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
8
StaticStatic igb_write_phy_reg_sgmii_82575 static s32 igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
9
StaticStatic igb_get_phy_id_82575 static s32 igb_get_phy_id_82575 - Retrieve PHY addr and id
10
StaticStatic igb_phy_hw_reset_sgmii_82575 static s32 igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
11
StaticStatic igb_set_d0_lplu_state_82575 static s32 igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
12
StaticStatic igb_acquire_nvm_82575 static s32 igb_acquire_nvm_82575 - Request for access to EEPROM
13
StaticStatic igb_release_nvm_82575 static void igb_release_nvm_82575 - Release exclusive access to EEPROM
14
StaticStatic igb_acquire_swfw_sync_82575 static s32 igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
15
StaticStatic igb_release_swfw_sync_82575 static void igb_release_swfw_sync_82575 - Release SW/FW semaphore
16
StaticStatic igb_get_cfg_done_82575 static s32 igb_get_cfg_done_82575 - Read config done bit
17
StaticStatic igb_get_link_up_info_82575 static s32 igb_get_link_up_info_82575 - Get link speed/duplex info
18
StaticStatic igb_check_for_link_82575 static s32 igb_check_for_link_82575 - Check for link
19
StaticStatic igb_get_pcs_speed_and_duplex_82575 static s32 igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
20
FunctionFunction igb_shutdown_serdes_link_82575 void igb_shutdown_serdes_link_82575 - Remove link during power down
21
StaticStatic igb_reset_hw_82575 static s32 igb_reset_hw_82575 - Reset hardware
22
StaticStatic igb_init_hw_82575 static s32 igb_init_hw_82575 - Initialize hardware
23
StaticStatic igb_setup_copper_link_82575 static s32 igb_setup_copper_link_82575 - Configure copper link settings
24
StaticStatic igb_setup_serdes_link_82575 static s32 igb_setup_serdes_link_82575 - Setup link for serdes
25
StaticStatic igb_valid_led_default_82575 static s32 igb_valid_led_default_82575 - Verify a valid default LED config
26
StaticStatic igb_sgmii_active_82575 static bool igb_sgmii_active_82575 - Return sgmii state
27
StaticStatic igb_reset_init_script_82575 static s32 igb_reset_init_script_82575 - Inits HW defaults after reset
28
StaticStatic igb_read_mac_addr_82575 static s32 igb_read_mac_addr_82575 - Read device MAC address
29
StaticStatic igb_power_down_phy_copper_82575 static void igb_power_down_phy_copper_82575 - Remove link during PHY power down
30
StaticStatic igb_clear_hw_cntrs_82575 static void igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
31
FunctionFunction igb_rx_fifo_flush_82575 void igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
32
StaticStatic igb_set_pcie_completion_timeout static s32 igb_set_pcie_completion_timeout - set pci-e completion timeout
33
FunctionFunction igb_vmdq_set_loopback_pf void igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
34
FunctionFunction igb_vmdq_set_replication_pf void igb_vmdq_set_replication_pf - enable or disable vmdq replication

See Also

目次 | ファイル一覧 | 関数一覧 | ネームスペース一覧 | クラス一覧 | #define一覧 | マクロ一覧 | 外部変数一覧 | 構造体一覧 | 共用体一覧 | 列挙体一覧 | Const一覧 | 索引 | サイドメニュー